Computer harddrive and other data storage media are generally the victims of water damage and flooding. It makes your whole data inaccessible and cause serious data loss situations. But you should not panic in such as cases as even if the storage media has been under water and its components have damaged, harddriverecovery is still possible. If your office or house floods and your critical data has not been backed up then you are really in a critical situation. The harddrive might have vital office documents, financial reports or priceless pictures. To overcome all these situations, you need to opt for DataRecovery service of an experienced and reliable company. To have safe and absolute recovery for your significant datafromwaterdamagedharddrive and prevent further data loss, here are few tips to help you:Remove your computer fromwater and do not switch it on because it may cause short circuit. Never try to dry or heat the harddrive. When flooding takes place, dirt and some other debris may enter into your computer and by attempting to remove waterfromdrive may accidental scratch the platters.Never open the drive in general environment. It should always be opened in safe and sterile environment of Clean Rooms by harddriverecovery software specialists. Take your harddrive and pack it in airtight bag. You should keep the harddrive moist. Search for a trustworthy recovery company and send your harddrive to it. Recovery Process in case of Water DamageConventional DataRecovery procedures are not application if the harddrive is having water damage. It might further damage the drive and cause permanent data loss. In such cases, proper handling of harddrive is very important as te oxidization of drive will start to occur. Consequently, the recovery is time consuming because the components must be handled very carefully. Recoveryfromwaterdamagedharddrive includes the following steps:Fresh water treatment or cleaningPlatter dismounting and surface treatmentChemical drying inside Clean RoomsPlatter surface re-lubricationRepairing or replacing damaged components The most important and critical step of recovery process is to find out the best recovery company. You should always go for a reliable and experience company to achieve successful recovery. Stellar Information Systems Limited is the most trustworthy and leading provider of personalized recovery service with 16 years of rich experience. Recovery service is carried out in State Of The Art Class 100 Clean Rooms by trained and skilled specialists using advanced tools and techniques.
Simpson is a student of Mass Communication doing research on partition recovery software.
Many people are not sure whether there is any possibility of performing a tape datarecovery process with datatapes that have been affected by water. While water is the most common contaminant for datatapes it is not the only one, however here we look at some of the things you should do and should not do if your datatapes have had some either large or small contact with water.
The following information relates generally to types of water ingress and if you have an instance where tapes have contact with liquid that may be mostly water but contains other contaminants there is a higher risk against possible recovery options. With other liquids, and depending on the liquid itself, you will need the professional assistance of a datarecovery expert at the earliest possible opportunity.
There are various factors that must be taken into consideration, not least of which is the actual liquid the exposure to the datatapes is with. Some of the other issues that will determine any possible datarecovery chances relate to the extent and length of the exposure itself.
In some cases it is not possible to determine the identity of the tapes themselves due to the exposure to water or other liquids and of course if you can identify the tapes and can decide which tapes are the most important this will reduce possible datarecovery costs for the process.
If you are in the unfortunate position that you have had your datatapes come into contact with water or other liquids and are in the need of tape datarecovery assistance then there are some steps to follow to continue on with the process:
Where you are still able to determine the contents of the datatapes you need to place them into categories of importance. The reason for this is that if you are able to identify which tapes hold which information then concentration can be given to restoration of that particular data over others tape data that may have less importance. You of course are in a much ore difficult situation if the water or liquid has removed traces of identification of your tapes.
Where safe to do so due to your own health consideration, place the tapes in to different batches relative to the amount of exposure that has occurred to them. For example if there was a box of tapes and those on the lower level have been sitting in liquid for a period of time where the top layers may have only received a small amount of liquid you can split the tapes into the two categories. Full exposure and light exposure.
Now is the time, if you haven’t done so already, to call in the datarecovery specialists. They can assist in relatively speedy attempts at datarecovery of those light exposure tapes and will have the necessary skills and knowledge to do the best that they can for those tapes that have been submerged or exposed to the liquids for a longer period of time.
• Those datatapes that have likely just had splashes of water on the outside of the tape and that you are certain have not been submerged and there is no residual water inside the tape cartridge can likely be dried and left for acclimatization and can then in all probability be restored normally.
• Those datatapes that have been fully immersed in water only, no other foreign liquid or contaminants within the water and only for a short period of time (so not longer than a few hours) will likely have water within the tape mechanism. These datatapes should NOT be used within a tape drive. Even though there is no obvious sign of residual water it is likely that the water has affected the datatapes and they will require careful and specialized internal cleaning and when left to the experts there is a much higher chance that the data can be recovered.
• Long term immersion of datatapes (more than a few hours) that have lots of obvious contamination and especially where the substance is not water will in all likelihood require re-casing and extensive and specific cleaning attention. When there is a longer period of immersion there is a high likelihood that the water or liquid ingress has progressed to the tape pack itself. While the tape is fairly robust, the more time the tape is exposed during immersion the more likelihood the data will be lost.
• It is very important that the tapes are not left to dry out. Often it is not the water itself that will cause the problem but the drying process that leaves the contaminating residues on the tapes surface. These contaminants often cause the most damage of the data evident when tape datarecovery is attempted by those who are not professionals. Seal the tapes themselves in a suitable container and area so that they are not able to dry out.
The most important aspect is to call in the experts at the earliest opportunity and get the recovery process started.
Why You Don’t Do Your Own Restoration.
If you try to read datafrom a damaged tape that perhaps has internal corrosion or the internal operating components are gummed up or there is residue on the tape itself then you are more likely to damage both your drive and the data tape itself. Then you not only have perhaps unrecoverable datatapes but you also may require drive repair as well. For any instances where there is water or any other form of liquid ingress to your datatapes you should immediately call datarecovery specialists to assist you and improve any chance that you may have to have your data recovered.
Michiel Van Kets writes articles for Altirium, an expert team of tape datarecovery company based in the UK providing high end specialists with deep understandings on tape recovery formats whether from half inch open reel tapes to LTO and DLT drives, giving on-going litigations and investigations an edge with the evidence uncovered. The company has also successfully dealt with data challenges in LTO Ultrium formats, with every LTO tape recovery problems examined and solved in detail.
The High-Level Symposium on WaterSecurity at the UnitedNations, organised by “The World Water Organisation” (WWO), was a gathering of experts from UN member states and professionals from the corporate, medical, and academic communities for a three-day conference. This symposium highlights the watersecurity issue, in the context of the global war against terrorism, identifies threats and vulnerabilities, and explores practical solutions for the protection and preservation of water infrastructure and systems worldwide. The Symposium also sought to develop a global good governance model in the event of water disasters.
Experts from around the world attended this event including WhitewaterSecurity. WhitewaterSecurity presented “The Israeli Holistic Approach to WaterSecurity” at the conference. The methodology behind the Israeli Holistic Approach was developed in Israel over the last 70 years and was used as the groundwork behind which the 5 pillars; prevention, protection, detection, crisis management and recovery, were formed. Each individual pillar serves its own purpose and has certain procedures that must be adhered to in order to minimise potential security threats.
The focal point of the WhitewaterSecurity presentation emphasized and exposed the capabilities of the “WaterWall™”, a watersecurity management system, to the world. The WaterWall™ combines all five pillars into one comprehensive solution that far surpasses anything on the market today. This synergy, combined with a real-time response mechanism allows precise management and security in every situation, from everyday tasks to minor or major crises. This is an all encompassing comprehensive solution, developed from Israel’s vast experience regarding both water and security.
The WaterWall™, WhitewaterSecurity’s flagship system, serves as an end-to-end watersecurity management system that helps the utility manage an array of events, intentional, deliberate or accidental, effectively securing the most precious natural resource in the world. The WaterWall™ complies with all the Environmental Protection Agency (EPA) and International Standards Organisation (ISO) guidelines and regulations for modern day watersecurity. The WaterWall™ offers governments, municipalities, water utilities, and high risk facilities around the world, a comprehensive, user friendly approach to watersecurity.
To learn more about WhitewaterSecurity, please visit us on www.w-watersecurity.com or contact us at raniw@w-water.com.
The High-Level Symposium on WaterSecurity at the UnitedNations, organised by “The World Water Organisation” (WWO), was a gathering of experts from UN member states and professionals from the corporate, medical, and academic communities for a three-day conference. This symposium highlights the watersecurity issue, in the context of the global war against terrorism, identifies threats and vulnerabilities, and explores practical solutions for the protection and preservation of water infrastructure and systems worldwide. The Symposium also sought to develop a global good governance model in the event of water disasters.
Experts from around the world attended this event including WhitewaterSecurity. WhitewaterSecurity presented “The Israeli Holistic Approach to WaterSecurity” at the conference. The methodology behind the Israeli Holistic Approach was developed in Israel over the last 70 years and was used as the groundwork behind which the 5 pillars; prevention, protection, detection, crisis management and recovery, were formed. Each individual pillar serves its own purpose and has certain procedures that must be adhered to in order to minimise potential security threats.
The focal point of the WhitewaterSecurity presentation emphasized and exposed the capabilities of the “WaterWall?”, a watersecurity management system, to the world. The WaterWall? combines all five pillars into one comprehensive solution that far surpasses anything on the market today. This synergy, combined with a real-time response mechanism allows precise management and security in every situation, from everyday tasks to minor or major crises. This is an all encompassing comprehensive solution, developed from Israel’s vast experience regarding both water and security.
The WaterWall?, WhitewaterSecurity’s flagship system, serves as an end-to-end watersecurity management system that helps the utility manage an array of events, intentional, deliberate or accidental, effectively securing the most precious natural resource in the world. The WaterWall? complies with all the Environmental Protection Agency (EPA) and International Standards Organisation (ISO) guidelines and regulations for modern day watersecurity. The WaterWall? offers governments, municipalities, water utilities, and high risk facilities around the world, a comprehensive, user friendly approach to watersecurity.
Contact Author
Email to Friends
Print Article
Make PDF
Bookmark & Share Article
Add a Comment
Report Article
Republish this Article 
